South African type EW1 tender
Type EW1 tender off Class 25NC, 2009 | |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
|
The South African type EW1 tender was a steam locomotive tender.
Type EW1 tenders entered service between 1953 and 1955, as tenders to the Class 25NC 4-8-4 Northern type steam locomotives which entered service on the South African Railways in those years.[1][2]
Manufacturers
Type EW1 tenders were built in 1953, eleven by North British Locomotive Company and 39 by Henschel and Son.[1]
The South African Railways (SAR) placed fifty Class 25NC locomotives in service between 1953 and 1955. The locomotive and tender was designed by L.C. Grubb, Chief Mechanical Engineer of the SAR from 1949 to 1954. It was the non-condensing version of the Class 25 condensing locomotive, of which ninety were placed in service at the same time.[1][3][4][5]
Characteristics
The tender rode on six-wheeled bogies, each with a 10 feet (3,048 millimetres) wheelbase and roller bearings. It was equipped with a mechanical stoker, of which the engine was mounted on the tender. The tank had a water capacity of 10,500 imperial gallons (47,700 litres) and the coal bunker a capacity of 18 long tons (18.3 tonnes). The tender had a one-piece steel casting water-bottom frame, with the frame itself forming the bottom of the tank, instead of being a separate tank and frame as in previous designs. The casting was done by Commonwealth Steel Castings Corporation in the United States of America.[1][2][3]
Locomotive
Only Class 25NC locomotives were delivered new with Type EW1 tenders, which were numbered in the range from 3401 to 3450 for their engines. An oval number plate, bearing the engine number and often also the locomotive class and tender type, was attached to the rear end of the tender.[1][3]
Classification letters
Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the SAR. The first letter of the tender type indicates the classes of engines to which it can be coupled. The "E_" tenders were arranged with mechanical stokers and could be used with the locomotive classes as shown.[2]
- Class 15F, if equipped with a mechanical stoker.
- Class 23.
- Class 25NC.
- Class 26.
The second letter indicates the tender's water capacity. The "_W1" tenders had a capacity of 10,500 imperial gallons (47,700 litres; 12,600 US gallons).[2]
Modification
Between 1979 and 1981, the last one of the Class 25NC locomotives, no. 3450, was rebuilt to the sole Class 26 Red Devil. The coal capacity of this locomotive's Type EW1 tender was increased from 18 long tons (18.3 tonnes) to approximately 20 long tons (20.3 tonnes) by raising the bunker sides. Since the water capacity remained unchanged, the tender was not reclassified.[6]
Illustration
- Type EW1 rear end, 2009
- Type EW1 showing stoker worm, 2009
- Raised bunker sides, Red Devil, 2010
References
- 1 2 3 4 5 Holland, D.F. (1972). Steam Locomotives of the South African Railways, Volume 2: 1910-1955 (1st ed.). Newton Abbott, Devon: David & Charles. p. 110. ISBN 978-0-7153-5427-8.
- 1 2 3 4 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. VIII, 6a-7a, 20-21, 28-28A.
- 1 2 3 Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 77–78. ISBN 0869772112.
- ↑ North British Locomotive Company works list, compiled by Austrian locomotive historian Bernhard Schmeiser
- ↑ Henschel-Lieferliste (Henschel & Son works list), compiled by Dietmar Stresow
- ↑ South Africa's 'Red Devil' (Accessed on 28 July 2016)