New South Wales Z25 class locomotive

New South Wales Z25 class

Class Z25 Locomotive
Type and origin
Power type Steam
Builder Beyer, Peacock & Co.
Serial number 2073–2092, 2308–2337, 2547–2565
Build date 1881–1885
Total produced 70
Specifications
Configuration 2-6-0
UIC class 1'Cn
Gauge 4 ft 8 1⁄2 in (1,435 mm)
Driver dia. 4 ft 0 in (1.219 m)
Adhesive weight 77,000 lb (35 t)
Loco weight 95,000 lb (43 t)
Fuel type Coal
Firebox:
 • Firegrate area		 21 sq ft (2.0 m2)
Boiler pressure 140 psi (0.97 MPa)
Heating surface 1,145 sq ft (106.4 m2)
Superheater None
Cylinders Two, outside
Cylinder size 18.5 in × 26 in (470 mm × 660 mm)
Performance figures
Tractive effort 22,060 lbf (98.1 kN)
Factor of adh. 3.49
Career
Operators New South Wales Government Railways
Class B205, Z25 from 1924
Numbers 205-254, 314-333
(2501-2570 from 1924)
Disposition 2 preserved, 68 scrapped

The Z25 class (formerly B.205 class) was a class of 2-6-0 wheel arrangement steam locomotives built by Beyer, Peacock & Co. for the New South Wales Government Railways of Australia.[1][2][3]

Design

In the late 1870s, only 11 of the 82 goods locomotives in service on the Southern and Western lines of the New South Wales Government Railways had a leading truck. The balance had a wheel arrangement of 0-6-0. To provide a more suitable locomotive for use over the 8 chain (161 m) radius curves of the Blue Mountains line, it was decided to incorporate a Bissell pony truck on an improved version of the A93 class.

Beyer, Peacock and Company prepared a design which was considered to be in advance of British contemporary practice. The first twenty 205 class entered service in 1882.[4]

In service

The new engines were found to be more sluggish than the 93 class when getting away with a load, but pulled decidedly better when running tender first. Following tests on the Blue Mountains, Commissioner Goodchap recommended the installation of 50 ft. (15.25 m) turntables at Sydney, Bathurst and Goulburn which were required to turn the new locomotives. Four were allocated to the then isolated Northern network.[2]

At that time, there were thirty 93 class locomotives on order. As Locomotive Engineer W. Scott considered the new 205 class better suited to his requirements, the order was amended to thirty 205 class locomotives, but with some minor improvements. These entered service in 1883/84, eight being allocated to Northern network.[2]

Both batches were found to be prone to slipping and additional weight was necessary to be added to the driving wheels.

A further twenty locomotives arrived in 1885, five of which going to the Northern system. This last batch had cabs with steel cutaway sides, an improvement on the open cabs of the earlier batches.[2]

In the late 1880s the class were based at Sydney, Goulburn, Penrith, Bathurst, Newcastle, Murrurundi and Armidale.[2]

From February 1901, all of the class were fitted with larger Belpaire boilers which increased their weight and also increased the heating surface, matters identified as deficient in William Thow’s Report of 1889.[5] At the same time, wooden cabs replaced the open cabs of the earlier batches.[2]

With the arrival of the T524 class locomotives in 1896, main line work began to be assigned to these newer classes and the 205 class were relegated to lighter branch lines.[6]

During the years of the Great Depression, many of these locomotives fell into derelict condition after becoming due for overhaul. Some were used during the load testing of the Sydney Harbour Bridge in 1932.[6]

Demise & Preservation

Preserved Z25 Class Locomotives
No.DescriptionManufacturerYearCurrent OrganisationLocationStatusRef
2510 2-6-0 goodsBeyer, Peacock and Company1882NSW Rail Transport MuseumThirlmerestatic exhibit NSW Locomotive, Steam 2510[7][8]
2535 2-6-0T passenger Beyer, Peacock and Company1883 Dorrigo Steam Railway and Museum Dorrigo stored

See also

References

Wikimedia Commons has media related to New South Wales Z25 class locomotives.
  1. ↑ Preston, Ron G (1984). Tender into Tank. Sydney: New South Wales Rail Transport Museum. pp. 11–57. ISBN 0 909862 18 4.
  2. 1 2 3 4 5 6 Grunbach, Alex (1989). A Compendium of New South Wales Steam Locomotives. Sydney: Australian Railway Historical Society, NSW Division. pp. 41–45. ISBN 0 909650 27 6.
  3. ↑ New South Wales Railways 1855-1955. Published by Department of Railways
  4. ↑ Grunbach, Alex (1989). A Compendium of New South Wales Steam Locomotives. Sydney: Australian Railway Historical Society, NSW Division. pp. 65–69. ISBN 0 909650 27 6.
  5. ↑ Grant, Darryl S (June 2005). "Two Colonies, Three Gauges - A Survey of the Locomotives of William Thow". Australian Railway History: 222–223.
  6. 1 2 Oberg, Leon (1984). Locomotives of Australia 1850's - 1980's. Frenchs Forest: Reed Books. p. 42. ISBN 0 730100 05 7.
  7. ↑ "Anatomy of a Restoration: 2510 Part II" Roundhouse January 1984 page 20
  8. ↑ "Anatomy of a Restoration: 2510 Part III" RoundhouseApril 1984 page 18
This article is issued from Wikipedia - version of the 7/17/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.