Zero-lift drag coefficient

In aerodynamics, the zero-lift drag coefficient $C_{D,0}$ is a dimensionless parameter which relates an aircraft's zero-lift drag force to its size, speed, and flying altitude.

Mathematically, zero-lift drag coefficient is defined as $C_{D,0} = C_D - C_{D,i}$ , where $C_{D}$ is the total drag coefficient for a given power, speed, and altitude, and $C_{D,i}$ is the lift-induced drag coefficient at the same conditions. Thus, zero-lift drag coefficient is reflective of parasitic drag which makes it very useful in understanding how "clean" or streamlined an aircraft's aerodynamics are. For example, a Sopwith Camel biplane of World War I which had many wires and bracing struts as well as fixed landing gear, had a zero-lift drag coefficient of approximately 0.0378. Compare a $C_{D,0}$ value of 0.0161 for the streamlined P-51 Mustang of World War II^[1] which compares very favorably even with the best modern aircraft.

The drag at zero-lift can be more easily conceptualized as the drag area ( $f$ ) which is simply the product of zero-lift drag coefficient and aircraft's wing area ( $C_{D,0} \times S$ where $S$ is the wing area). Parasitic drag experienced by an aircraft with a given drag area is approximately equal to the drag of a flat square disk with the same area which is held perpendicular to the direction of flight. The Sopwith Camel has a drag area of 8.73 sq ft (0.811 m²), compared to 3.80 sq ft (0.353 m²) for the P-51. Both aircraft have a similar wing area, again reflecting the Mustang's superior aerodynamics in spite of much larger size.^[1] In another comparison with the Camel, a very large but streamlined aircraft such as the Lockheed Constellation has a considerably smaller zero-lift drag coefficient (0.0211 vs. 0.0378) in spite of having a much larger drag area (34.82 ft² vs. 8.73 ft²).

Furthermore, an aircraft's maximum speed is proportional to the cube root of the ratio of power to drag area, that is:

V_{max}\ \propto\ \sqrt[3]{power/f}

.^[1]

Estimating zero-lift drag^[1]

As noted earlier, $C_{D,0} = C_D - C_{D,i}$ .

The total drag coefficient can be estimated as:

C_D = \frac{550 \eta P}{\frac{1}{2} \rho_0 [\sigma S (1.47V)^3]}

where $\eta$ is the propulsive efficiency, P is engine power in horsepower, $\rho _{0}$ sea-level air density in slugs/cubic foot, $\sigma$ is the atmospheric density ratio for an altitude other than sea level, S is the aircraft's wing area in square feet, and V is the aircraft's speed in miles per hour. Substituting 0.002378 for $\rho _{0}$ , the equation is simplified to:

C_D = 1.456 \times 10^5 (\frac{\eta P}{\sigma S V^3})

The induced drag coefficient can be estimated as:

C_{D,i} = \frac{C_L^2}{\pi A \epsilon}

where $C_{L}$ is the lift coefficient, A is the aspect ratio, and $\epsilon$ is the aircraft's efficiency factor.

Substituting for $C_{L}$ gives:

C_{D,i}=\frac{4.822 \times 10^4}{A \epsilon \sigma^2 V^4} (W/S)^2

where W/S is the wing loading in lb/ft².

References

1 2 3 4 Loftin, LK, Jr. "Quest for performance: The evolution of modern aircraft. NASA SP-468". Retrieved 2006-04-22.

This article is issued from Wikipedia - version of the 7/16/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.

Zero-lift drag coefficient

Estimating zero-lift drag[1]

References

Estimating zero-lift drag^[1]