USNS Yukon (T-AO-202)

For other ships with the same name, see USS Yukon and USNS Yukon.
USNS Yukon in the Pacific Ocean
History
United States
Name: USNS Yukon
Namesake: The Yukon River in Alaska
Ordered: 6 October 1988
Builder: Avondale Shipyard, Inc., New Orleans, Louisiana
Laid down: 13 May 1991
Launched: 6 February 1993
In service: 25 March 1994-present
Status: In active Military Sealift Command service
General characteristics
Class and type: Henry J. Kaiser-class fleet replenishment oiler
Type: Fleet replenishment oiler
Tonnage: 31,200 DWT
Displacement:
  • 9,500 tons light
  • Full load variously reported as 42,382 tons and 40,700 long tons (41,353 metric tons)
Length: 677 ft (206 m)
Beam: 97 ft 5 in (29.69 m)
Draft: 35 ft (11 m) maximum
Installed power:
  • 16,000 hp (11.9 MW) per shaft
  • 34,442 hp (25.7 MW) total sustained
Propulsion: Two medium-speed Colt-Pielstick PC4-2/2 10V-570 diesel engines, two shafts, controllable-pitch propellers
Speed: 20 knots (37 km/h; 23 mph)
Capacity:
Complement:
  • 103 (18 civilian officers, 1 U.S. Navy officer, 64 merchant seamen, 20 U.S. Navy enlisted personnel)
  • Also given as 89 civilian and 3 U.S. Navy personnel
Armament:
  • Peacetime: usually none
  • Wartime: probably 2 x 20 mm Phalanx CIWS
Aircraft carried: None
Aviation facilities: Helicopter landing platform
Notes:
  • Five refueling stations
  • Two dry cargo transfer rigs

USNS Yukon (T-AO-202) is a Henry J. Kaiser-class underway replenishment oiler operated by the Military Sealift Command to support ships of the United States Navy.

Yukon, the sixteenth ship of the Henry J. Kaiser class, was laid down at Avondale Shipyard, Inc., at New Orleans, Louisiana, on 13 May 1991 and launched on 6 February 1993. She entered non-commissioned U.S. Navy service under the control of the Military Sealift Command with a primarily civilian crew on 25 March 1994. She serves in the United States Pacific Fleet.

On 27 February 2000, Yukon collided with a smaller civilian cargo ship while entering the port of Dubai in the Persian Gulf.

On 13 July 2000, Yukon collided with the amphibious transport dock USS Denver (LPD-9) during an underway replenishment about 180 nautical miles (330 km) west of Hawaii. No one on either ship was injured, and there were no fuel leaks, but Yukon suffered major damage, including several large holes and dents above the water line on her starboard quarter, while a 40-foot (12.2 m) hole was torn in Denver's bow from the second deck to the waterline. The investigation into the accident found Denver responsible.[1] Both ships went to the Pearl Harbor Naval Shipyard at Pearl Harbor, Hawaii, for repairs. Yukon then transited to San Francisco, California, for further repairs at the same time as her scheduled routine overhaul. Yukon returned to service in January 2001.

On 16 May 2012, Yukon collided with the amphibious assault ship USS Essex (LHD-2) after Essex suffered an apparent steering malfunction upon approach for an underway replenishment. There were no injuries and no loss of fuel was reported. Both vessels were able to continue to San Diego, California, under their own power. The crew of the USS Essex was blamed in a report.[2]

Notes and references

  1. ↑ "USS DENVER'S SKIPPER IS BLAMED FOR COLLISION WITH MSC TANKER".
  2. ↑ Julie Watson (2012-05-16). "2 US Navy ships collide in Pacific; no injuries". seattlepi.com. Retrieved 2012-05-17.
Wikimedia Commons has media related to USNS Yukon (T-AO-202).


This article is issued from Wikipedia - version of the 6/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.