Straight whiskey

Straight whiskey (or straight whisky), as defined in United States law, is whiskey created by distilling a fermented (malted or unmalted) cereal grain mash to create a spirit not exceeding 80% alcohol content by volume (abv) and then aging the spirit for at least two years at an abv concentration not exceeding 62.5% at the start of the aging process.^[1]

Mixing whiskey from different barrels (and sometimes from different distilleries, although only from within the same state), filtering, and dilution with water (while retaining at least a 40% abv concentration) are the only allowed modifications for straight whiskey prior to its bottling. American straight whiskey must be aged in charred new oak barrels and must be put into the barrels for aging at a concentration not exceeding 62.5% abv. When bottled, only water to reduce proof may be added. This is the definition established for production of American whiskey for consumption within the United States as per the U.S federal Standards of Identity for Distilled Spirits.^[1] (The regulations do not necessarily apply to American whiskey made for export.^[2])

Alternatively, straight can also refer to a way of requesting and/or serving a drink of whiskey—pouring the spirit without any water, cordial, or other mixer. Thus, in bartending terminology, straight is typically synonymous with neat.

Aging and bottled in bond requirements

The core aging requirement that defines a whiskey as straight is if the distillate has spent at least two years stored in charred new oak barrels,^[1] except corn whiskey which must use uncharred or used oak barrels. The spirit mellows in this time and penetrates the wood, extracting many of the flavor compounds and caramelized wood sugars.

A straight whiskey that has been aged less than four years is required to be labeled with an age statement describing the actual age of the product.^[3]

Other than an age statement, which is a direct reference to the age of the youngest spirit in a bottle, the only other special labeling dealing with the age of a straight whiskey in the U.S. is bottled in bond. All bonded whiskeys are required to be straight whiskeys, and are additionally required to be aged for at least four years. Bonded whiskeys must also fulfill several other requirements, including:^[2]

• They must be produced from a single mash type at a single distillery during a single distillation season (analogous to a single malt whiskey).
• They must be bottled at 100 U.S. proof (50% alcohol by volume).
• They must be aged in a federally bonded warehouse.
• The label must identify the distillery at which the product was distilled and, if different, the plant at which it was bottled.

Ingredients

When at least 51% of the content of the mash used in the distillation of a straight whiskey consisted of corn, rye, barley, or wheat, the designation can be coupled with a special name associated with the type of grain and whether the grain was malted. For example, a straight whiskey may be a bourbon whiskey (using a mash of corn), malt whiskey (using a mash of malted barley), rye whiskey, rye malt whiskey, or wheat whiskey. An especially prominent variation is the labeling "Kentucky Straight Bourbon Whiskey", used to indicate a straight whiskey made in Kentucky from a mash of at least 51% corn grain.

For a straight whiskey to be called corn whiskey, it must use a mash with at least 80% corn and be aged in used or uncharred barrels.

Extra ingredients, such as caramel coloring, are forbidden in straight whiskey. To contrast, even the regulations governing single malt whiskey production in some countries allow the addition of caramel coloring to enhance appearance.^[4]

Distillation limit

The limit of 80% maximum abv concentration for the distillation is a key element of the definition of straight whiskey. At alcohol concentrations exceeding this amount, most of the flavor from the original fermented mash that was used in the distillation process will be removed, resulting in a more neutral grain spirit.

In other countries, whiskey may be produced from a spirit that is much higher in alcoholic proof, which generally reduces the flavor derived from the original mash that was used in its production.^[4]

Relationship to blended whiskey

Straight whiskey is a distinctly different product from blended whiskey. Most premium-category brands of American whiskey are straight whiskey, while the economy category is primarily blended whiskey.

However, straight whiskey is also an important component of American blended whiskey. Blended whiskey made in the United States must contain at least 20% straight whiskey.^[2] The remaining portion is higher-proof spirit, often unaged neutral grain spirits, which are less expensive to produce. The straight whiskey component adds characteristic whiskey flavor to the blend, as the higher proof spirit loses most flavoring compounds during the distillation process, and does not gain flavors from barrel aging. Blended whiskey may also contain additives for coloring and flavoring.

Canadian whisky, which is typically a blend, also uses straight-whiskey-style spirits as a major flavor component, though Canada does require at least three years of aging (usually in used barrels) to qualify any product as Canadian whisky or as "rye whisky".^[5]

References

Whisky
Whisky types	Malt whisky Single malt Blended malt Grain whisky Buckwheat Corn Rye Rye malt Wheat
Other designations	Blended Bottled in bond Single barrel Single pot still Small batch Straight
Whisky by region	American Bourbon Tennessee Australian Canadian English Finnish French German Indian Irish Japanese Scotch Welsh
Whisky production	Cask strength Chill filtering Finishing Independent bottler Lincoln County Process Mash Sour mash Master blender Spirit safe Whiskey thief
Whisky tourism	American Whiskey Trail Kentucky Bourbon Trail Scotch Whisky Experience Scotland's Malt Whisky Trail
See also	Cranachan Glencairn whisky glass List of cocktails List of whisky brands Moonshine Poitín Skalk Uisce beatha Viscimetry Whisky tasting Whisky with food
Liquor portal