Slide plate
A slide plate is linear bearing such as may be part of the expansion joints of bridges, high temperature horizontal ducts of water-tube boilers and other mechanical or structural engineering applications. In each case one plate is fixed and the other slides on top as expansion or contraction occurs.
The plates provide a surface with a low coefficient of friction which can be attached to a supporting structure. This combination provides support while simultaneously allowing an object to move (slide) freely along the supporting surface.[1] The plate may be of polytetrafluoroethylene (PTFE),TEF-MET,[2] Lubrite[3] or steel according to the application.
Multiple design variations are possible but the most common example of a slide plate (in structural applications) has glass-filled PTFE [4] bonded to a steel backing plate. In these applications a two-part system is used which has an upper element with stainless steel surface face-down and bearing on a lower element with its PTFE steel backing surface face-up.[5] In most applications, the upper element is larger than the lower element by the amount of movement expected. This has a two-fold advantage of maintaining a constant bearing area and preventing the lower surface from being exposed to dirt, grit or other contaminants throughout the range of motion.[6]
Slides plates are arranged in a 'sandwich' formation, which is made of an upper slide plate and a lower slide plate component.[7]
Commonly used in [8]
- Oil/gas/chemical industries
- Complex steel structures
- Post-tensioned concrete structures
See also
References
- ↑ Piping Technology: Product Catalog, Piping Technology & Products, Inc.(retrieved 30 August 2010)
- ↑ http://www.sbs-bearings.com.sg/home/
- ↑ Lubrite technologies
- ↑ http://www.pipingtech.com/products/ptpcat/slideplate/ptfe.htm
- ↑ http://www.sbs-bearings.com.sg/products/detail/mode/detailView/product/Flachstuetzlager/
- ↑ Fluorogold Product Literature, Slide Bearings, LP (retrieved 20 January 2014)
- ↑ Slide Plate Applications Piping Technology & Products, (retrieved January 2012)
- ↑ http://www.pretread.com