Saturated calomel electrode

The Saturated calomel electrode (SCE) is a reference electrode based on the reaction between elemental mercury and mercury(I) chloride. It has been widely replaced by the silver chloride electrode, however the calomel electrode has a reputation of being more robust. The aqueous phase in contact with the mercury and the mercury(I) chloride (Hg₂Cl₂, "calomel") is a saturated solution of potassium chloride in water. The electrode is normally linked via a porous frit to the solution in which the other electrode is immersed. This porous frit is a salt bridge.

In cell notation the electrode is written as:

{\text{Cl}}^{-}{\big (}4M{\big )}{\big |}{\text{Hg}}_{2}{\text{Cl}}_{2}{\big (}{\text{s}}{\big )}{\big |}{\text{Hg}}{\big (}{\text{l}}{\big )}{\big |}{\text{Pt}}

Theory of operation

The electrode is based on the redox reaction

{\text{Hg}}_{2}^{2+}+2{\text{e}}^{-}\rightleftharpoons 2{\text{Hg(l)}}

The Nernst equation for this reaction is

E=E_{{\text{Hg}}_{2}^{2+}/{\text{Hg}}}^{0}-{\frac {RT}{2F}}\ln {\frac {1}{a_{{\text{Hg}}_{2}^{2+}}}}

where E⁰ is the standard electrode potential for the reaction and a_Hg is the activity for the mercury cation (the activity for a liquid of 1 Molar is 1). This activity can be found from the solubility product of the reaction

{\text{Hg}}_{2}^{2+}+2{\text{Cl}}^{-}\rightleftharpoons {\text{Hg}}_{2}{\text{Cl}}_{2}{\text{(s)}},\qquad K_{\text{sp}}=a_{{\text{Hg}}_{2}^{2+}}a_{{\text{Cl}}^{-}}^{2}

By replacing the activity in the Nernst equation with the value in the solubility equation, we get

E=E_{{\text{Hg}}_{2}^{2+}/{\text{Hg}}}^{0}+{\frac {RT}{2F}}\ln K_{\text{sp}}-{\frac {RT}{2F}}\ln a_{{\text{Cl}}^{-}}^{2}

The only variable in this equation is the activity (or concentration) of the chloride anion. But since the inner solution is saturated with potassium chloride, this activity is fixed by the solubility of potassium chloride. When saturated the redox potential of the calomel electrode is +0.2444 V vs. SHE at 25 °C, but slightly higher when the chloride solution is less than saturated. For example, a 3.5M KCl electrolyte solution increases the reference potential to +0.250 V vs. SHE at 25 °C, and a 0.1 M solution to +0.3356 V at the same temperature.^[1]

Application

The SCE is used in pH measurement, cyclic voltammetry and general aqueous electrochemistry.

This electrode and the silver/silver chloride reference electrode work in the same way. In both electrodes, the activity of the metal ion is fixed by the solubility of the metal salt.

The calomel electrode contains mercury, which poses much greater health hazards than the silver metal used in the Ag/AgCl electrode.

References

↑ http://www.cem.msu.edu/~cem333/Week11.pdf

Banus MG (June 1941). "A DESIGN FOR A SATURATED CALOMEL ELECTRODE". Science. 93 (2425): 601–602. doi:10.1126/science.93.2425.601-a. PMID 17795970.

This article is issued from Wikipedia - version of the 12/1/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.

Saturated calomel electrode

Theory of operation

Application

See also

References