Rotortec Cloud Dancer II

Cloud Dancer II
Role Autogyro
National origin Germany
Manufacturer Rotortec
Designer Jochen Steinbeck
Introduction 2009
Status In production (2013)
Unit cost
63,000 (2011)

The Rotortec Cloud Dancer II is a German autogyro, designed by Jochen Steinbeck and produced by Rotortec of Görisried, Allgäu. The aircraft was first shown at AERO Friedrichshafen in 2009 and is supplied as a complete ready-to-fly-aircraft.[1]

Design and development

The Cloud Dancer II features a single four-bladed main rotor, a two-seats in side-by-side configuration enclosed cockpit, tricycle landing gear with wheel pants and a twin cylinder, air-cooled, four-stroke, turbocharged 135 hp (101 kW) Rotortec MPE engine that was developed in-house and is mounted in pusher configuration. It drives a three-bladed composite propeller though a planetary reduction drive.[1]

The aircraft fuselage and the three vertical surface tail are made from aluminum and Kevlar composites. Its 6.7 m (22.0 ft) diameter rotor has a chord of 17.5 cm (6.9 in) and is equipped with a micro-processor controlled hydraulic pre-rotator. The prototype aircraft mounted a three-bladed main rotor, but this was changed to a four-bladed unit during development. The four-bladed rotor provides improved vibration levels, but at the cost of requiring larger space for storage. An electronic touchscreen instrument panel is standard equipment. The aircraft has an empty weight of 248.5 kg (548 lb) and a gross weight of 450 kg (992 lb), giving a useful load of 201.5 kg (444 lb). The fuel tanks hold 115 litres (25 imp gal; 30 US gal), giving a full fuel payload of 120 kg (265 lb).[1]

Aircraft on display

Specifications (Cloud Dancer II)

Data from Bayerl[1]

General characteristics

Performance

References

  1. 1 2 3 4 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, page 186. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
Wikimedia Commons has media related to Rotortec Cloud Dancer II.
This article is issued from Wikipedia - version of the 6/23/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.