Post hoc analysis

Not to be confused with Post hoc theorizing.

In the design and analysis of experiments, post hoc analysis (from Latin post hoc, "after this") consists of looking at the data—after the experiment has concluded—for patterns that were not specified a priori. It is sometimes called data dredging by critics to evoke the sense that the more one looks the more likely something will be found. More subtly, each time a pattern in the data is considered, a statistical test is effectively performed. This greatly inflates the total number of statistical tests and necessitates the use of multiple testing procedures to compensate. However, this is difficult to do precisely and in fact most results of post hoc analyses are reported as they are with unadjusted p-values. These p-values must be interpreted in light of the fact that they are a small and selected subset of a potentially large group of p-values. Results of post hoc analyses should be explicitly labeled as such in reports and publications to avoid misleading readers.

In practice, post hoc analyses are usually concerned with finding patterns and/or relationships between subgroups of sampled populations that would otherwise remain undetected and undiscovered were a scientific community to rely strictly upon a priori statistical methods. Post hoc tests—also known as a posteriori tests—greatly expand the range and capability of methods that can be applied in exploratory research. Post hoc examination strengthens induction by limiting the probability that significant effects will seem to have been discovered between subgroups of a population when none actually exist. As it is, many scientific papers are published without adequate, preventative post hoc control of the type I error rate.^[1]

Post hoc analysis is an important procedure without which multivariate hypothesis testing would greatly suffer, rendering the chances of discovering false positives unacceptably high. Ultimately, post hoc testing creates better informed scientists who can therefore formulate better, more efficient a priori hypotheses and research designs.

Relationship with the multiple comparisons problem

Further information: Multiple comparisons

In its most literal and narrow sense, post hoc analysis simply refers to unplanned data analysis performed after the data is collected in order to reach further conclusions. In this sense, even a test that does not provide Type I Error Rate^[1] protection, using multiple comparisons methods, is considered as post hoc analysis. A good example is performing initially unplanned multiple t-tests at level $\alpha \,\!$ , following an $\alpha \,\!$ level anova test. Such post hoc analysis does not include multiple testing procedures, which are sometimes difficult to perform precisely. Unfortunately, analyses such as the above are still commonly conducted and their results reported with unadjusted p-values. Results of post hoc analyses which do not address the multiple comparisons problem should be explicitly labeled as such to avoid misleading readers.

In the wider and more useful sense, post hoc analysis tests enable protection from the multiple comparisons problem, whether the inferences made are selective or simultaneous. The type of inference is related directly to the hypotheses family of interest. Simultaneous inference indicates that all inferences, in the family of all hypotheses, are jointly corrected up to a specified type I error rate. In practice, post hoc analyses are usually concerned with finding patterns and/or relationships between subgroups of sampled populations that would otherwise remain undetected and undiscovered were a scientific community to rely strictly upon a priori statistical methods . Therefore, simultaneous inference may be too conservative for certain large scale problems that are currently being addressed by science. For such problems, a selective inference approach might be more suitable, since it assumes that sub-groups of hypotheses from the large scale group can be viewed as a family. Selective post hoc examination strengthens induction by limiting the probability that significant differences will seem to have been discovered between sub-groups of a population when none actually exist. Accordingly, p-values of such sub-groups must be interpreted in light of the fact that they are a small and selected subset of a potentially large group of p-values.

Tests

Further information: Family-wise error rate § Controlling procedures

The following are referred to as "post hoc tests". However, on some occasions a researcher may have initially planned on using them, thus referring to them as "post-hoc tests" is not entirely accurate. For instance, The Newman–Keuls and Tukey's methods are often referred to as post hoc. However, it is not uncommon to plan on testing all pairwise comparisons before seeing the data. Therefore, in such cases, these tests are better categorized as a priori.

Fisher's least significant difference (LSD)

This technique was developed by Ronald Fisher in 1935 and is used most commonly after a null hypothesis in an analysis of variance (ANOVA) test is rejected (assuming normality and homogeneity of variances). A significant ANOVA test only reveals that not all the means compared in the test are equal. Fisher's LSD is basically a set of individual t-tests, differentiated only in the calculation of the standard deviation. In each t-test, a pooled standard deviation is computed from only the two groups being compared, while the Fisher's LSD test computes the pooled standard deviation from all groups - thus increasing power. Fisher's LSD does not correct for multiple comparisons.^[2]

The Bonferroni procedure

Main article: Bonferroni correction

Denote by $p_{i}$ the p-value for testing $H_{{i}}$
reject $H_{{i}}$ if $p_{{i}}\leq {\frac {\alpha }{m}}$
$m$ being the number of hypotheses

This method is flexible (requires no assumptions) and very simple to compute, but can result in a large reduction in the statistical power of the test. That is, because the cut-off value is reduced, it becomes substantially more difficult for any result to be found statistically significant.

Holm–Bonferroni method

Main article: Holm–Bonferroni method

Start by ordering the p-values $P_{(1)} \ldots P_{(m)}$ and let the associated hypotheses be $H_{{(1)}}\ldots H_{{(m)}}$
Let $R$ be the smallest $k$ such that $P_{{(k)}}>{\frac {\alpha }{m+1-k}}$
Reject the null hypotheses $H_{{(1)}}\ldots H_{{(R-1)}}$ . If $R=1$ then none of the hypotheses are rejected.
This procedure is universally more powerful than the Bonferroni correction.
It is worth noticing here that the reason why this procedure controls the family-wise error rate for all the m hypotheses at level α in the strong sense is because it is essentially a closed testing procedure. As such, each intersection is effectively tested using the simple Bonferroni test.

Newman–Keuls method

Main article: Newman–Keuls method

A stepwise multiple comparisons procedure used to identify sample means that are significantly different from each other. It is used often as a post hoc test whenever a significant difference between three or more sample means has been revealed by an analysis of variance (ANOVA)

Duncan's new multiple range test (MRT)

Main article: Duncan's new multiple range test

Duncan developed this test as a modification of the Newman–Keuls method that would have greater power. Duncan's MRT is especially protective against false negative (Type II) error at the expense of having a greater risk of making false positive (Type I) errors.

Rodger's method

Main article: Rodger's method

Rodger's method is a procedure for examining research data post hoc following an 'omnibus' analysis, that is after carrying out an analysis of variance (ANOVA). Rodger's method utilizes a decision-based error rate, arguing that it is not the probability ( $\alpha$ ) of rejecting $H_{0}$ in error that should be controlled, rather it is the average rate of rejecting true null contrasts that should be controlled. Meaning we should control the expected rate ( $\operatorname {E}\alpha$ ) of true null contrast rejection.

Scheffé's method

Main article: Scheffé's method

Scheffé's method applies to the set of estimates of all possible contrasts among the factor level means, not just the pairwise differences. Having an advantage of flexibility, it can be used to test any number of post hoc simple and/or complex comparisons that appear interesting. However, the drawback of this flexibility is a low type I error rate, and a low power.

Tukey's procedure

Main article: Tukey's range test

Tukey's procedure is only applicable for pairwise comparisons.
It assumes independence of the observations being tested, as well as equal variation across observations (homoscedasticity).
The procedure calculates for each pair the studentized range statistic: ${\frac {Y_{{A}}-Y_{{B}}}{SE}}$ where $Y_{{A}}$ is the larger of the two means being compared, $Y_{{B}}$ is the smaller, and $SE$ is the standard error of the data in question.
Tukey's test is essentially a Student's t-test, except that it corrects for family-wise error-rate.

A correction with a similar framework is Fisher’s LSD (least significant difference).

Dunnett's correction

Main article: Dunnett's test

Charles Dunnett (1955, 1966) described an alternative alpha error adjustment when k groups are compared to the same control group. Now known as Dunnett's test, this method is less conservative than the Bonferroni adjustment.

Sidák's inequality

Main article: Šidák correction for t-test

Benjamini–Hochberg (BH) procedure

Main article: Benjamini–Hochberg procedure

BH-procedure is a step-up procedure iterating over $H_{1},\ldots ,H_{m}$ null hypotheses tested and $P_{{(1)}},\ldots ,P_{{(m)}}$ , their ordered p-values in an increasing order. The method then proceeds to identify the rejected null hypotheses from the above set, whilst controlling the false discovery rate (at level $\alpha$ ) under the premise that the total $m$ hypotheses are independent or positively correlated.

References

1 2 Jaccard, J.; Becker, M. A.; Wood, G. (1984). "Pairwise multiple comparison procedures: A review". Psychological Bulletin. 96 (3): 589. doi:10.1037/0033-2909.96.3.589.
↑ Hayter, A. J. (1986). "The Maximum Familywise Error Rate of Fisher's Least Significant Difference Test". Journal of the American Statistical Association. 81 (396): 1000–1004. doi:10.2307/2289074.

Bibliography

James E. Carlson and Others (1975). "The Distribution of the Test Statistic Used in the Newman–Keuls Multiple Comparison Technique", Annual Meeting of the American Educational Research Association (Washington, D. C., March 30–April 3, 1975)
Klockars, A. J.; Hancock, G. R. (2000). "Scheffé's More Powerful F-Protected Post Hoc Procedure". Journal of Educational and Behavioral Statistics. 25 (1): 13–19. doi:10.2307/1165310.

This article is issued from Wikipedia - version of the 10/5/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.