OSA-UCS

In colorimetry the OSA-UCS (Optical Society of America Uniform Color Space) is a color space first published in 1947 and developed by the Optical Society of America’s Committee on Uniform Color Scales.^[1] Previously created color order systems, such as the Munsell color system, failed to represent perceptual uniformity in all directions. The committee decided that, in order to accurately represent uniform color differences in each direction, a new shape of three dimensional cartesian geometry would need to be used.^[1]^[2]

History and Development

The development of the OSA-UCS took place during many years, from 1947-1977. Not long after the first mathematical color model was developed by the CIE, David MacAdam showed that when selecting a color on the CIE chromaticity diagram, it could not be guaranteed that colors of the same perceived color difference around this color were at the same color distance with respect to the reference color.^[1] More simply, the Euclidean distance between any two colors on the chromaticity diagram could not be used as a uniform measure of perceived color difference. Immediately following this discovery work began to create a space that would behave uniformly in all directions of color difference.

Starting with a sample of 59 colored tiles of non-uniform color differences, the OSA asked 72 observers to judge color differences between the different sample tiles.^[2] From the data collected, formulas were developed and parameters were defined to create the new uniform color space. They chose the reference 10 degree observer and Illuminant D65 to characterize the uniform space and a neutral gray background of 30% reflectance. In the end, 558 color samples were produced - 424 full step and 54 half step - and distributed by the OSA.^[1]

Design

Geometry

Cuboctahedron.

The ideal color solid with points all at an equal distance from a center point is a sphere - however a collection of spheres can not be packed to form a larger solid without gaps. The geometry that the OSA finally chose is a rhombohedral lattice based on a cuboctahedron. Each of the 12 vertices of this solid are equal distance from the center, as well as from each of their neighbors. The last step to completing this geometry was in a rescaling of the vertical L axis, in order to achieve integer coordinate locations for color description. The color distance uniformity is maintained, as only the axis dimensions are scaled, and the scaling is accounted for in the color distance formula.^[1]

Coordinate Values

The three perpendicular dimensions of the OSA-UCS are the lightness dimension L, the jaune dimension j (a yellow/blue opponent dimension) and the green dimension g (a green/red opponent dimension).

Lightness (L)

The lightness scale of the OSA-UCS color solid varies vertically from about -10 to 8. UCS lightness of 0 corresponds to the 30% reflective neutral background gray selected for their samples, while lighter shades have positive values and darker shades have negative values.

Jaune (j)

The jaune dimension of the OSA-UCS color solid runs horizontally and perpendicular to the L dimension. This is a yellow-blue chromatic dimension, varying from positive values appearing more yellowish to negative values appearing more blueish. A j value of 0 lies along the neutral axis.

Green (g)

The green dimension of the OSA-UCS runs horizontally perpendicular to both the L and j dimensions. This green-red chromatic axis varies from more greenish positive values to more pinkish negative values. Again, a g value of 0 lies along the neutral (L) axis.

Color Groupings

The cuboctahedron structure of the OSA-UCS color solid can be geometrically divided into 9 planes, known as cleavage planes. These 9 cleavage planes are defined as:^[3]

L - A plane of constant L (lightness) that runs perpendicular to the L axis, where j and g can take on any values.
j - A plane of constant j (yellow-blueness) that runs perpendicular to the j axis, where L and g can take on any values.
g - A plane of constant g (red-greenness) that runs perpendicular to the g axis, where L and j can take on any values.
L+j - A plane of constant L+j that runs parallel to the g axis, at 35° from the L axis and 55° from the j axis.
L−j - A plane of constant L-j that runs parallel to the g axis, at 35° from the L axis and 55° from the j axis.
L+g - A plane of constant L+g that runs parallel to the j axis, at 35° from the L axis and 55° from the g axis.
L−g - A plane of constant L-g that runs parallel to the g axis, at 35° from the L axis and 55° from the g axis.
j+g - A plane of constant j+g that runs parallel to the L axis, at 45° from the j and g axes.
j−g - A plane of constant j-g that runs parallel to the L axis, at 45° from the j and g axes.

Color Difference

OSA-UCS color difference is defined by the simple Euclidean distance between two colors in the color space, that takes into account the scaling done to the L axis. The formula used to calculate color difference between color 1 and 2 is:

\Delta UCS={\sqrt {({\sqrt {2}}L_{2}-{\sqrt {2}}L_{1})^{2}+(j_{2}-j_{1})^{2}+(g_{2}-g_{1})^{2}}}={\sqrt {2\Delta L^{2}+\Delta j^{2}+\Delta g^{2}}}

Due to the design of the system, the color difference between two neighbors in the OSA-UCS color space is always 2. Small color differences can be accurately calculated using this formula. Larger color differences, however, require a non-linear correction for accuracy.^[1]

Color Transformations

CIEXYZ to OSA-UCS

To perform an analytical conversion from a CIEXYZ value to OSA-UCS, the following steps should be followed. First, a factor representing the Helmholtz-Kohlrausch effect must be calculated from the x and y chromaticity coordinates:

K=4.4934x^{2}+4.3034y^{2}-4.276xy-1.3744x-2.5643y+1.8103

Next determine the modified luminous reflectance:

Y_{0}=K*Y

Then calculate the lightness and chroma modification factor:

L' = 5.9(Y_0^{1/3} - \frac{2}{3} + 0.042(Y_0 - 30)^{1/3})

(given as

L

in the original paper^[4])

L = \frac{1}{\sqrt{2}}(L' - 14.3993)

C = \frac{L'}{5.9(Y_0^{1/3} - \frac{2}{3})} = 1 + \frac{0.042(Y_0 - 30)^{1/3}}{Y_0^{1/3} - \frac{2}{3}}

Convert the XYZ values to RGB using the linear matrix transformation:

{\begin{bmatrix}R\\G\\B\end{bmatrix}}={\begin{bmatrix}0.7990&0.4194&-0.1648\\-0.4493&1.3265&0.0927\\-0.1149&0.3394&0.7170\end{bmatrix}}{\begin{bmatrix}X\\Y\\Z\end{bmatrix}}

Last, calculate a and b:

a=-13.7R^{{1/3}}+17.7G^{{1/3}}-4B^{{1/3}}

b=1.7R^{{1/3}}+8G^{{1/3}}-9.7B^{{1/3}}

and multiply them by C to obtain OSA-UCS g and j:

g=C*a

j=C*b

OSA-UCS to CIEXYZ

Although no closed-form conversion from OSA-UCS to CIEXYZ exists, numerical solvers have been written, including one based on the Newton-Raphson method^[5] and another based on an artificial neural network.^[6]

References

1 2 3 4 5 6 "BabelColor: The Optical Society of America Uniform Color Scales" (PDF).
1 2 Kuehni, Rolf G. Color, An Introduction to Practice and Principles, 3rd Edition. Wiley. pp. 100–105. ISBN 978-1-118-17384-8.
↑ "Optical Society of America Uniform Color Scales (OSA-UCS)".
↑ MacAdam, David L. (1 December 1974). "Uniform color scales". Journal of the Optical Society of America. 64 (12): 1695. doi:10.1364/JOSA.64.001691. Retrieved 15 September 2015.
↑ Kobayasi, Mituo; Yosiki, Kayoko (June 2002). "Effective conversion algorithm from OSA-UCS to CIEXYZ". Proceedings of SPIE. 4421 (1). doi:10.1117/12.464524.
↑ Cao, R; Trussell, HJ; Shamey, R (1 August 2013). "Comparison of the performance of inverse transformation methods from OSA-UCS to CIEXYZ.". Journal of the Optical Society of America. A, Optics, image science, and vision. 30 (8): 1508–15. PMID 24323208. Retrieved 15 September 2015.

Color space

List of color spaces Color models

CAM	CIECAM02 iCAM

CIE	CIEXYZ CIELAB CIECAM02 CIELUV Yuv CIEUVW CIE RGB

RGB	Color space sRGB RG chromaticity Adobe Wide Gamut ProPhoto scRGB DCI-P3 Rec. 709 Rec. 2020 Rec. 2100

YUV	YUV PAL YDbDr SECAM YIQ NTSC YCbCr Rec. 601 Rec. 709 Rec. 2020 Rec. 2100 YPbPr xvYCC YCgCo

Other	CcMmYK CMYK Coloroid LMS Hexachrome HSL, HSV HCL Imaginary color OSA-UCS PCCS RG RYB

Color systems and standards	ANPA Colour Index International CI list of dyes DIC Federal Standard 595 HKS ICC profile ISCC–NBS Munsell NCS Ostwald Pantone RAL list

For the vision capacities of organisms or machines, see Color vision.

This article is issued from Wikipedia - version of the 9/16/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.