o-Anisidine

o-Anisidine
Skeletal formula of o-anisidine
Ball-and-stick model of the o-anisidine molecule
Names
Preferred IUPAC name
2-Methoxyaniline
Other names
o-Anisidine (no longer recommended[1])
2-Anisidine
ortho-Aminoanisole
o-Methoxyaniline
2-Methoxy-1-aminobenzene
2-Methoxyphenylamine
Identifiers
90-04-0 YesY
3D model (Jmol) Interactive image
ChEMBL ChEMBL1612004 N
ChemSpider 13860775 YesY
ECHA InfoCard 100.001.785
EC Number 201-963-1
KEGG C19191 YesY
UN number 2431
Properties[2]
C7H9NO
Molar mass 123.16 g·mol−1
Appearance Yellow liquid, turns brown upon exposure to air
Density 1.0923 g/cm3
Melting point 6.2 °C (43.2 °F; 279.3 K)
Boiling point 224 °C (435 °F; 497 K)
1.5 g/100 ml
Solubility soluble in ethanol, diethyl ether, acetone, benzene
Hazards
Main hazards potential occupational carcinogen[3]
Toxic (T)
Carc. Cat. 2
Muta. Cat. 3
R-phrases R45, R23/24/25, R68
S-phrases S53, S45
NFPA 704
Flammability code 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g., canola oil Health code 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g., chloroform Reactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g., liquid nitrogen Special hazards (white): no codeNFPA 704 four-colored diamond
1
2
0
Flash point 118 °C (244 °F; 391 K) (open cup)
415 °C (779 °F; 688 K)
Lethal dose or concentration (LD, LC):
2000 mg/kg (rat, oral)
1400 mg/kg (mouse, oral)
870 mg/kg (rabbit, oral)[4]
US health exposure limits (NIOSH):
PEL (Permissible)
TWA 0.5 mg/m3 [skin][3]
REL (Recommended)
 : Ca TWA 0.5 mg/m3 [skin][3]
IDLH (Immediate danger)
50 mg/m3[3]
Related compounds
Related compounds
m-Anisidine
p-Anisidine
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

o-Anisidine (2-anisidine) is a yellow liquid with a melting point of −1 to 5 °C and a density of 1.09 g/cm3. The vapor pressure is 0.05 mbar at 20 °C but increases greatly with temperature. It has an aromatic smell and is well absorbed by inhalation, oral ingestion and skin contact. o-Anisidine is a very toxic agent that causes blood, enzyme and nerve damage with cyanosis and the danger of suffocation.[3] The agent is an experimental carcinogen and is strongly suspected to be a human carcinogen also. o-Anisidine has dangerous pollutant properties for water. Non-wastewaters from the production of dyes containing o-Anisidine are listed as RCRA hazardous waste, with the code K181.[5] o-Anisidine is used in the manufacture of dyes. Workers in the dye industry may be occupationally exposed to it. Acute (short-term) exposure to o-anisidine results in skin irritation in humans. Workers exposed to o-anisidine by inhalation for 6 months developed headaches, vertigo, and effects on the blood. Animal studies have reported effects on the blood from chronic (long-term) dermal exposure to o-anisidine. No information is available on the reproductive, developmental, or carcinogenic effects of o-anisidine in humans. Animal studies have reported tumors of the urinary bladder from oral exposure to o-anisidine. EPA has not classified o-anisidine for carcinogenicity. The International Agency for Research on Cancer (IARC) has classified o-anisidine as a Group 2B, possible human carcinogen.[6]

References

  1. Nomenclature of Organic Chemistry : IUPAC Recommendations and Preferred Names 2013 (Blue Book). Cambridge: The Royal Society of Chemistry. 2014. p. 669. doi:10.1039/9781849733069-FP001. ISBN 978-0-85404-182-4. The names ‘toluidine’, ‘anisidine’, and ‘phenetidine’ for which o-, m-, and p- have been used to distinguish isomers, and ‘xylidine’ for which numerical locants, such as 2,3-, have been used, are no longer recommended, nor are the corresponding prefixes ‘toluidine’, ‘anisidino’, ‘phenetidine’, and ‘xylidino’.
  2. Weast, Robert C., ed. (1981). CRC Handbook of Chemistry and Physics (62nd ed.). Boca Raton, FL: CRC Press. p. C-98. ISBN 0-8493-0462-8..
  3. 1 2 3 4 5 "NIOSH Pocket Guide to Chemical Hazards #0034". National Institute for Occupational Safety and Health (NIOSH).
  4. "o-Anisidine". Immediately Dangerous to Life and Health. National Institute for Occupational Safety and Health (NIOSH).
  5. http://www.epa.gov/osw/hazard/wastetypes/wasteid/dyes/index.htm
  6. https://pubchem.ncbi.nlm.nih.gov/compound/o-anisidine#section=Top
This article is issued from Wikipedia - version of the 9/16/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.