Laser surface velocimeter

A laser surface velocimeter (LSV) is a non-contact optical speed sensor measuring velocity and length on moving surfaces. Laser surface velocimeters use the laser Doppler principle to evaluate the laser light scattered back from a moving object. They are widely used for process and quality control in industrial production processes.

Principle of operation

The differential Doppler process

The Doppler effect (or Doppler shift) is the change in frequency of a wave for an observer moving relative to the source of the wave. The wave has a frequency f and propagates at a speed c When the observer moves at a velocity of v relative to the source, he receives a different frequency f' according to

f' = f ( c-v ) = f \left( 1-\frac{v}{c} \right)

The above analysis is an approximation for small velocities in comparison to the speed of light which is fulfilled very well for practically all technically relevant velocities.

To make a measurement on moving objects, which can in principle be of any length, requires a measurement design with an observation axis for the sensor which is at a right angle to the direction of movement of the object under investigation.

Laser surface velocimeters work according to the socalled Difference Doppler Technique. Here, 2 laser beams which are each incident to the optical axis at an angle φ, are superimposed on the surface of the object. For a point P, which moves at velocity v through the intersection point of the two laser beams, the frequencies of the two laser beams are Doppler shifted in accordance with the above formula. At the point P of the object which is moving at the velocity v, the following frequencies therefore occur:

f_\text{P1,2} = f_\text{1,2} \left( 1- \vec v \ast \frac{\vec e_\text{1,2}}{c}\right)

\vec e_\text{1,2,e}

= Unit vectors of laser beams 1 and 2 and in direction detector

f_1,2 = Frequencies of the laser beams 1 and 2

f_P1,P2 = Doppler shifted frequencies of laser beams 1 and 2 in point P

The point P now emits scatter waves in the direction of the detector. As P is moving with the object, the scattered radiation in the direction $\vec e_\text{e}$ of the detector is also Doppler shifted. Thus for the frequency of the scatter waves in the direction of the detector, it can be said:

\begin{align} f_\text{e1,e2} & = f_\text{P1,P2} \left( 1 - \frac{\vec v \ast \vec e_\text{e}}{c} \right) \\ & = f_\text{1,2} \left( 1 - \frac{\vec v \ast \vec e_\text{1,2}}{c} \right) \left( 1 - \frac{\vec v \ast \vec e_\text{e}}{c} \right) \end{align}

The scatter waves are superimposed on the detector. Due to the interference of the scatter waves from the two laser beams, there are different frequency components in the superimposition. The low-frequency beat frequency of the superimposed scatter radiation which corresponds to the Doppler frequency f_D is analyzed metrologically. When both incidental laser beams are at the same frequency (same wavelength), this is seen as a difference of f_e2 and f_e1 to:

\begin{align} f_\text{D} & = f_\text{e2} - f_\text{e1} \\ & = f \left(\vec v \ast \frac{\vec e_\text{1} - \vec e_\text{2}}{c} \right) \left( \frac{\vec v \ast \vec e_\text{e}}{c} \right) \end{align}

If point P moves vertically with reference to the optical axis and at the same angle of incidence φ, it can be said that:

\vec v \ast (\vec e_\text{1} - \vec e_\text{2}) = 2 v \sin \varphi

and

\vec v \ast \vec e_\text{e}=0

This means the final result is:

f_\text{D} = \frac{v}{\Delta s}

The Doppler shift is thus directly proportional to the velocity. A graphic explanation which leads to the same result follows:

Graphic representation

Principle of laser surface velocimetry

Both the laser beams are superimposed in the measurement volume and in this spatial area, generate an interference pattern of bright and dark fringes.

The fringe spacing Δs is a system constant which depends on the laser wavelength λ and the angle between the laser beams 2φ:

\Delta s = \frac{\lambda}{2 \sin \varphi}

If a particle moves through the fringe pattern, then the intensity of the light it scatters back is modulated.

As a result of this, a photo receiver in the sensor head generates an AC signal, the frequency f_D of which is directly proportional to the velocity component of the surface in measurement direction v_p and it can be said that:

f_\text{D} = \frac{v_\text{p}}{\Delta s} = \frac{2v}{\lambda} \sin \varphi

f_D = Doppler frequency

v_p = Velocity component in the direction of measurement

Δs = Fringe spacing in the measurement volume

The heterodyne technique

Laser surface velocimeters work in the so-called heterodyne mode, i.e. the frequency of one of the laser beams is shifted by an offset of 40 MHz, e.g.. This makes the fringes in the measurement volume travel with a velocity corresponding to the offset frequency f_B. This then makes it possible to identify the direction of movement of the object and to measure at the velocity zero. The resulting modulation frequency f_mod at the photo receiver in heterodyne mode is:

f_\text{mod} = f_\text{b} + \frac{v_\text{p}}{\Delta s} = f_\text{b} + \frac{2v}{\lambda} \sin \varphi

The modulation frequency is determined in the controller using Fourier transformation and converted into the measurement value for the velocity v_p. The length measurement is made by integrating the velocity signal.

Applications

Laser surface velocimeters measure speed and length of moving surfaces on coils, strips, tubes, fiber, film, paper, foil, composite lumber, or almost any other moving material, including hot steel.^[1] LSVs can accomplish various tasks like cut-to-length control, part length and spool length measurement, speed measurement and speed control, differential speed measurement for mass flow control, encoder calibration, ink-jet marker control, and many others.

References

↑ "Polytec InFocus 2/2010 page 19" (PDF).

Literature

Peter M. Nawfel: Laser based, noncontact speed sensor helps reduce breaks on high speed unwind. TAPPI, 2004.
K. Matsubara, W. Stork, A. Wagner, J. Drescher, and K. D. Müller-Glaser: Simultaneous measurement of the velocity and the displacement of the moving rough surface by a laser Doppler velocimeters. Applied Optics, Vol. 36, Issue 19, pp. 4516–4520, 1997 (online).
Bruce E. Truax, Frank C. Demarest, and Gary E. Sommargren: Laser Doppler velocimeter for velocity and length measurements of moving surfaces. Applied Optics, Vol. 23, Issue 1, pp. 67–73, 1984 (online).

External links

Operating Principle of Laser Surface Velocimetry (Video)

Sensors

Acoustic, sound, vibration	Geophone Hydrophone Microphone Seismometer

Automotive, transportation	Air–fuel ratio meter Blind spot monitor Crankshaft position sensor Curb feeler Defect detector Engine coolant temperature sensor Hall effect sensor MAP sensor Mass flow sensor Omniview technology Oxygen sensor Parking sensors Radar gun Speed sensor Speedometer Throttle position sensor Tire-pressure monitoring system Torque sensor Transmission fluid temperature sensor Turbine speed sensor Variable reluctance sensor Vehicle speed sensor Water sensor Wheel speed sensor

Chemical	Breathalyzer Carbon dioxide sensor Carbon monoxide detector Catalytic bead sensor Chemical field-effect transistor Electrochemical gas sensor Electrolyte–insulator–semiconductor sensor Electronic nose Fluorescent chloride sensors Holographic sensor Hydrocarbon dew point analyzer Hydrogen sensor Hydrogen sulfide sensor Infrared point sensor Ion selective electrode Microwave chemistry sensor Nitrogen oxide sensor Nondispersive infrared sensor Olfactometer Optode Oxygen sensor Pellistor pH glass electrode Potentiometric sensor Redox electrode Smoke detector Zinc oxide nanorod sensor

Electric, magnetic, radio	Current sensor Electroscope Galvanometer Hall effect sensor Hall probe Magnetic anomaly detector Magnetometer MEMS magnetic field sensor Metal detector Planar Hall sensor Radio direction finder Test light

Environment, weather, moisture	Actinometer Bedwetting alarm Ceilometer Dew warning Electrochemical gas sensor Fish counter Frequency domain sensor Gas detector Hook gauge evaporimeter Humistor Hygrometer Leaf sensor Psychrometer Pyranometer Pyrgeometer Rain gauge Rain sensor SNOTEL Snow gauge Soil moisture sensor Stream gauge Tide gauge Weather radar

Flow, fluid velocity	Air flow meter Anemometer Flow sensor Gas meter Mass flow sensor Water metering

Ionising radiation, subatomic particles	Bubble chamber Cloud chamber Geiger counter Neutron detection Particle detector Scintillation counter Scintillator Wire chamber

Navigation instruments	Airspeed indicator Machmeter Altimeter Attitude indicator Depth gauge Fluxgate compass Gyroscope Inertial navigation system Inertial reference unit Magnetic compass MHD sensor Ring laser gyroscope Turn coordinator Variometer Vibrating structure gyroscope Yaw-rate sensor

Position, angle, displacement	Accelerometer Auxanometer Capacitive displacement sensor Capacitive sensing Gravimeter Inclinometer Integrated circuit piezoelectric sensor Laser rangefinder Laser surface velocimeter Lidar Linear encoder Linear variable differential transformer Liquid capacitive inclinometers Odometer Photoelectric sensor Piezoelectric accelerometer Position sensor Rate sensor Rotary encoder Rotary variable differential transformer Selsyn Sudden Motion Sensor Tachometer Tilt sensor Ultrasonic thickness gauge Variable reluctance sensor Velocity receiver

Optical, light, imaging	Charge-coupled device Contact image sensor Electro-optical sensor Flame detector Infrared Kinetic inductance detector LED as light sensor Light-addressable potentiometric sensor Nichols radiometer Optical fiber Photodetector Photodiode Photoelectric sensor Photoionization detector Photomultiplier Photoresistor Photoswitch Phototransistor Phototube Position sensitive device Scintillometer Shack–Hartmann wavefront sensor Single-photon avalanche diode Superconducting nanowire single-photon detector Transition edge sensor Tristimulus colorimeter Visible-light photon counter Wavefront sensor

Pressure	Barograph Barometer Boost gauge Bourdon gauge Hot-filament ionization gauge Ionization gauge McLeod gauge Oscillating U-tube Permanent Downhole Gauge Piezometer Pirani gauge Pressure gauge Pressure sensor Tactile sensor Time pressure gauge

Force, density, level	Bhangmeter Force gauge Hydrometer Level sensor Load cell Magnetic level gauge Nuclear density gauge Piezoelectric sensor Strain gauge Torque sensor Viscometer

Thermal, heat, temperature	Bimetallic strip Bolometer Calorimeter Exhaust gas temperature gauge Flame detection Gardon gauge Golay cell Heat flux sensor Infrared thermometer Microbolometer Microwave radiometer Net radiometer Quartz thermometer Resistance thermometer Silicon bandgap temperature sensor Special sensor microwave/imager Thermistor Thermocouple Thermometer

Proximity, presence	Alarm sensor Doppler radar Motion detector Occupancy sensor Passive infrared sensor Proximity sensor Reed switch Stud finder Touch switch Triangulation sensor Wired glove

Sensor technology	Active pixel sensor Back-illuminated sensor Biochip Biosensor Capacitance probe Carbon paste electrode Catadioptric sensor Digital sensors Displacement receiver Electromechanical film Electro-optical sensor Fabry–Pérot interferometer Fisheries acoustics Image sensor Image sensor format Inductive sensor Intelligent sensor Lab-on-a-chip Leaf sensor Machine vision Microelectromechanical systems Photoelasticity Quantum sensor Radar Ground-penetrating radar Synthetic aperture radar Radar tracker Sensor array Sensor fusion Sensor grid Sensor node Soft sensor Sonar Staring array Transducer Ultrasonic sensor Video sensor technology Visual sensor network Wheatstone bridge Wireless sensor network

Related	List of sensors

This article is issued from Wikipedia - version of the 10/24/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.