John O'Connell Bridge
| John O'Connell Bridge | |
|---|---|
 The John O'Connell Bridge over the Sitka Channel | |
| Coordinates | 57°02′52″N 135°20′26″W / 57.04782°N 135.34054°WCoordinates: 57°02′52″N 135°20′26″W / 57.04782°N 135.34054°W[1] |
| Carries | 2 lanes of AK-935 |
| Crosses | Sitka Channel |
| Locale | Sitka, Alaska |
| Characteristics | |
| Design | Cable-stayed bridge |
| Material |
steel (pylons)[2] composite steel-reinforced concrete (deck)[2] |
| Total length | 1,255 feet (383 m) |
| Width | 38 feet (11.6 m) |
| Longest span | 450 feet (137 m) |
| Clearance below | 52 feet (15.8 m) |
| History | |
| Construction end | 1971[2] |
| Opened | 1972 |
| Statistics | |
| Daily traffic | 4,900 (2008) |
  | |
The John O'Connell Bridge is a cable-stayed bridge over the Sitka Channel located in Sitka, Alaska. The bridge connects the town of Sitka on Baranof Island to the airport and Coast Guard Station on Japonski Island. Until the bridge was completed in 1971 the commute was only achievable through a ferry service. The bridge is named after John W. O'Connell, a former mayor of Sitka. The two-lane bridge is 1,255 feet (383 m) in total length, with a main span of 450 feet (140 m). The bridge was also the United States' first vehicular cable-stayed girder spanned bridge. The four 100-foot (30 m)-high steel pylons carry two three-cable sets, each carrying a section of the bridge deck.[3][4]
References
- ↑ "Harbor Drive Bridge". Bridgehunter.com. Retrieved 2012-07-02.
- 1 2 3 O'Connell Bridge at Structurae
- ↑ http://cruises.about.com/od/alaskacruises/ig/Sitka-Alaska/O-Connell-Bridge-in-Sitka-AK.htm
- ↑ http://www.johnweeks.com/cablestay/pages/csb02.html
This article is issued from Wikipedia - version of the 7/16/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.