Gibson Byrdland

Gibson Byrdland

1969 Gibson Byrdland, Sunburst finish.
Manufacturer Gibson
Period 195575; 1977, 1978, 1992
Construction
Body type hollow body
Neck joint set
Scale 23½"
Woods
Body spruce top, maple body
Neck maple
Fretboard ebony with pearl block inlay
Hardware
Bridge Tune-o-matic
Pickup(s) Alnico (1955-58), Gibson Humbucker (1958)
Colors available
Sunburst or natural most common

The Byrdland is an electric guitar made by Gibson. Its name derives from the names of guitarists Billy Byrd and Hank Garland for whom Gibson originally custom built the guitar.

Thinline series

The Byrdland is the first of Gibson's Thinline series.[1] Many guitarists did not desire the bulk of a traditional archtop guitar such as Gibson's L-5, one of Gibson's top models. The Byrdland, with its overall depth of 2¼-in, is thinner than the L-5's 3⅜" depth. Gibson's president, Ted McCarty, sought opinions and ideas about new products. The suggestions from Byrd and Garland led to the development of the Byrdland. The Byrdland, first made in 1955, is essentially a custom built, thinner, L-5CES (Cutaway-Electric-Spanish). Later, the two specified a shorter scale and narrower-than-standard neck. Guitarists who had an opportunity to play Gibson samples liked the Byrdland's short scale neck (23½"), which facilitated intricate single-note patterns and unusual stretched chord voicings. The Byrdland then became a regular production instrument. One thing which hampered the instrument's popularity in the ensuing years was the narrow neck width (1 5/8" at the nut, as opposed to Gibson's standard nut width of 1 11/16"). Gibson developed the ES-350T from the Byrdland using less-costly hardware and detailing, and offered it as a less expensive model.[2]

From 1955 to 1960, Gibson made the Byrdland with a Venetian, or rounded, cutaway. The illustration shows the Venetian style. From 1961 to 1968, it used the sharp, pointed, Florentine cutaway. It returned to the Venetian in 1969. The model was in production from 1955 through early 1969 with the narrow nut width. In 1969, the nut width was changed to the standard 1 11/16", although some 1970's examples were produced with the narrow nut.

In the mid-1960s, guitarist Ted Nugent began using a Byrdland, which was unusual considering Nugent's style of music. The hollow-bodied design of the guitar caused feedback at higher levels of gain and volume, making it impractical for hard rock and similar styles. Nugent, however, controlled this feedback and incorporated it into his playing and as a result, it has become part of his signature sound. Nugent gives his Byrdlands, and other Gibsons, a custom touch by removing the stock pickup selector switch knobs and installing Gretsch strap-lock knobs.[3] Other famous Byrdland players are John McLaughlin, Anthony Wilson, Louie Shelton, David T. Walker and James Blood Ulmer.

The guitar is currently available as part of Gibson's Custom series and is made with the Florentine cutaway.[4][5] In 1976 only, Gibson offered a twelve-string version, but made fewer than 20.

The famous jazz club, Birdland, filed a lawsuit against Gibson over the name. The court dismissed the suit when Gibson showed that the name was made up from the names of two people.[6]

Notable Byrdland players

References

  1. Duchossoir. op. cit p. 57-8
  2. Duchossior, Andre "Gibson Electrics, The Classic Years" pp. 57–60 Hal Leonard Corp., 1998
  3. http://www.vintageguitar.com/1971/ted-nugents-1962-gibson-byrdland/
  4. Gibson website accessed 7-11-2009
  5. blue book. op. cit. pp429-G
  6. Duchossoir. op. cit. p. 60

External links

Wikimedia Commons has media related to Gibson Byrdland.
This article is issued from Wikipedia - version of the 11/7/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.