Enamine

The general structure of an enamine

An enamine is an unsaturated compound derived by the condensation of an aldehyde or ketone with a secondary amine.^[1][2] Enamines are versatile intermediates.^[3][4]

Condensation to give an enamine.^[5]

The word "enamine" is derived from the affix en-, used as the suffix of alkene, and the root amine. This can be compared with enol, which is a functional group containing both alkene (en-) and alcohol (-ol). Enamines are considered to be nitrogen analogs of enols.^[6]

If one of the nitrogen substituents is a hydrogen atom, H, it is the tautomeric form of an imine. This usually will rearrange to the imine; however there are several exceptions (such as aniline). The enamine-imine tautomerism may be considered analogous to the keto-enol tautomerism. In both cases, a hydrogen atom switches its location between the heteroatom (oxygen or nitrogen) and the second carbon atom.

Enamines are both good nucleophiles and good bases. Their behavior as carbon-based nucleophiles is explained with reference to the following resonance structures.

Reactions

Enamine Formation

Enamines are labile and therefore chemically useful moieties which can be easily produced from commercially available starting reagents. . A common route for enamine production is via an acid-catalyzed nucleophilic reaction of ketone ( Stork, 1963) or aldehyde ( Mannich/Davidsen 1936) species containing an α-hydrogen with secondary amines. Acid catalysis is not always required, if the pKa of the reacting amine is sufficiently high (for example, pyrrolidine- pKa 11.26). If the pKa of the reacting amine is low, however, then acid catalysis is required through both the addition and the dehydration steps^[7] ( common dehydrating agents include MgSO₄ and Na₂SO₄).^[8] Primary amines are usually not used for enamine synthesis due to the preferential formation of the more thermodynamically stable imine species.^[9] Methyl ketone self-condensation is a side-reaction which can be avoided through the addition of TiCl₄^[10] into the reaction mixture ( to act as a water scavenger).^[11][12] An example of an aldehyde reacting with a secondary amine to form an enamine via a carbinolamine intermediate is shown below:

Enamine Alkylation

Even though enamines are more nucleophilic than their enol counterparts, they can still react selectively, rendering them particularly useful for alkylation reactions. The enamine nucleophile can attack haloalkanes to form the alkylated iminium salt intermediate which then hydrolyzes to regenerate a ketone ( a starting material in enamine synthesis). This reaction was pioneered by Gilbert Stork, and is sometimes referred to by the name of its inventor. Analogously, this reaction can be used as an effective means of acylation. A variety of alkylating and acylating agents including benzylic, allylic halides can be used in this reaction.^[13]

Enamine Acylation

In a reaction much similar to the enamine alkylation, enamines can be acylated to form a final dicarbonyl product. The enamine starting material undergoes a nucleophilic addition to acyl halides forming the iminium salt intermediate which can hydrolyze in the presence of acid.^[14]

Metalloenamines

Strong bases such as (LiNR2 can be used to deprotonate imines and form metalloenamines. Metalloenamines can prove synthetically useful due to their nucleophilicity ( they are more nucleophilic than enolates). Thus they are better able to react with weaker electrophiles ( for example, they can be used to open epoxides.^[15]) Most prominently, these reactions have allowed for asymmetric alkylations of ketones through transformation to chiral intermediate metalloenamines.^[16]

Enamine Halogenation

β-halo immonium compounds can be synthesized through the reaction of enamines with halides in diethyl ether solvent. Hydrolysis will result in the formation of α-halo ketones.^[17] Chlorination, bromination, and even iodination have been shown to be possible. The general reaction is shown below:

Oxidative Coupling

Enamines can be efficiently cross-coupled with enol silanes through treatment with Ce(IV) ammonium nitrate. These reactions were reported by the Narasaka group in 1935, providing a route to stable enamines as well as one instance of a 1,4 diketone (derived from a morpholine amine reagent).^[18] Later, these results were exploited by the McMillan group with the development of an organocatalyst which used the Narasaka substrates to produce 1,4 dicarbonyls enantioselectively, with good yields.^[19] Oxidative dimerization of aldehydes in the presence of amines proceeds through the formation of an enamine followed by a final pyrrole formation.^[20] This method for symmetric pyrrole synthesis was developed in 2010 by the Jia group, as a valuable new pathway for the synthesis of pyrrole-containing natural products.^[21]

Hajos–Parrish–Eder–Sauer–Wiechert reaction

This reaction, reported in 1971 by several research teams, is an early example of an enantioselective catalytic reaction in organic chemistry.^[22] Its scope has been modified and expanded through the development of related reactions including the Michael addition, asymmetric aldol reaction, and the Mannich reaction. This reaction has likewise been used to perform asymmetric Robinson annulations. The general scheme of this reaction follows:

This is an example of a 6-enolendo aldolization.

A prominent example of proline catalysis is the addition of acetone or hydroxyacetone to a diverse set of aldehydes catalyzed by 20-30% proline catalyst loading with high (>99%) enantioselectivity yielding diol products.^[23] This chemistry was initially studied by the Barbas group at the Scripps Research Institute,^[24] and later refined by List and Notz who used the aforementioned reaction to produce diol products as follows:^[25]

Proline Catalyzed Enolexo Aldolizations

These reactions are a recent development in contrast to their enolendo counterparts. Dicarbonyl (dials,diketones) can be converted to anti-aldol products with a 10% L-proline catalyst loading. This is an example of an enolexo intramolecular aldolization.^[26][27]

Annulation

Enamines chemistry has been implemented for the purposes of producing a one-pot enantioselective version of the Robinson annulation. The Robinson annulation, published by Robert Robinson in 1935, is a base-catalyzed reaction that combines a ketone and a methyl vinyl ketone (commonly abbreviated to MVK) to form a cyclohexenone fused ring system. This reaction may be catalyzed by proline to proceed through chiral enamine intermediates which allow for good stereoselectivity.^[28] This is important, in particular in the field of natural product synthesis, for example, for the synthesis of the Wieland-Mescher ketone – a vital building block for more complex biologically active molecules.^[29][30]

Enamine Reactivity

Enamines act as nucleophiles that require less acid/base activation for reactivity than their enolate counterparts. They have also been shown to offer a greater selectivity with less side reactions. There is a gradient of reactivity among different enamine types, with a greater reactivity offered by ketone enamines than their aldehyde counterparts.^[31] Cyclic ketone enamines follow a reactivity trend where the five membered ring is the most reactive due to its maximally planar conformation at the nitrogen, following the trend 5>8>6>7 ( the seven membered ring being the least reactive). This trend has been attributed to the amount of p-character on the nitrogen lone pair orbital- the higher p character corresponding to a greater nucleophilicity because the p-orbital would allow for donation into the alkene π- orbital. Analogously, if the N lone pair participates in stereoelectronic interactions on the amine moiety, the lone pair will pop out of the plane ( will pyramidalize) and compromise donation into the adjacent π C-C bond.^{[32] [33]}

There are many ways to modulate enamine reactivity in addition to altering the steric/electronics at the nitrogen center including changing temperature, solvent, amounts of other reagents, and type of electrophile. Tuning these parameters allows for the preferential formation of E/Z enamines and also affects the formation of the more/less substituted enamine from the ketone starting material.^[34]

Enamine Transition States

Proline Catalyzed Aldol Reactions

Proline-catalyzed aldol additions undergo a six-membered enamine transition state according to the Zimmerman-Traxler model. Addition of 20-30 mol% proline to acetone or hydroxyacetone catalyzes their addition to a diverse set of aldehydes with high (>99%) enantioselectivity yielding diol products.^{[35] [36] [37]} Proline and proline derivatives have been implemented as organocatalysts to promote asymmetric condensation reactions. An example of such a reaction proceeding through a six membered transition state is modelled as follows.

Intramolecular aldolization reactions that are catalyzed by proline likewise go through six-membered transition states- these transition states can enable the formation of either the enolexo or the enolendo product.^[38]

See also

• Enders SAMP/RAMP hydrazone-alkylation reaction
• Hajos–Parrish–Eder–Sauer–Wiechert reaction
• Michael Addition
• Nenitzescu indole synthesis
• Organocatalysis
• Robinson Annulation
• Stork enamine alkylation
• Thorpe reaction
• Fluoxymesterone

References

• Utubersity lectures