Design Manual for Roads and Bridges

The DMRB is used to design trunk roads such as the A20 in the UK.

The Design Manual for Roads and Bridges (DMRB) is a series of 15 volumes that provide standards, advice notes and other documents relating to the design, assessment and operation of trunk roads, including motorways in the United Kingdom, and, with some amendments, the Republic of Ireland.

DMRB volumes form part of a suite of technical documents produced by Highways England, which comprises:

Overview

The volumes within the Design Manual for Roads and Bridges are:[1]

Volume 0 - Introduction and General requirements
Volume 1 - Highway Structures: Approval Procedures and General Design
Volume 2 - Highway Structures: Design (Substructures and Special Structures), Materials
Volume 3 - Highway Structures: Inspection and Maintenance
Volume 4 - Geotechnics and Drainage
Volume 5 - Assessment and Preparation of Road Schemes
Volume 6 - Road Geometry
Volume 7 - Pavement Design and Maintenance
Volume 8 - Traffic Signs and Lighting
Volume 9 - Traffic Control and Communications
Volume 10 - Environmental Design
Volume 11 - Environmental Assessment
Volume 12 - Traffic Appraisal of Road Schemes
Volume 13 - Economic Assessment of Road Schemes [Volume Withdrawn]
Volume 14 - Economic Assessment of Road Maintenance [Volume Withdrawn]
Volume 15 - Economic Assessment of Road Schemes in Scotland

The individual volumes contain technical requirements and guidance on a wide range of highway related topics, necessary to deliver works on the Strategic Road Network[2]

Specific Subjects

Scheme appraisal

In terms of scheme appraisal, the cost-benefit and environmental impact assessment methods set out in DMRB provide important inputs into the approach used to appraise new road schemes, including the former New Approach to Appraisal.

Safety barriers (road restraint systems)

The approach to safety barriers was revised in 2005/06 from a prescriptive approach to a risk assessment-based system (Road Restraints Risk Assessment Process (RRRAP)).[3] TD 19/06 - "Requirements for Road Restraint Systems"[4] was issued and the safety barrier drawings in Volume 3 of the Manual of Contract Documents for Highways Works were withdrawn, to be replaced by Highways Agency accepted EN 1317 Road Restraint Systems list.[5]

Timeline

When the DMRB was originally published in 1992 it only covered roads in England and Wales. Its remit was subsequently extended to include roads in Scotland and Northern Ireland. DMRB is managed by the Highways England on behalf of the agencies responsible for trunk roads in Scotland, Wales and Northern Ireland, however the requirements given may be subject to regional variations.

Use in Republic of Ireland

Rather than create a separate design manual for roads in the Republic of Ireland, the UK's Design Manual for Roads and Bridges has also applied in the Republic of Ireland since 2001, with an additional addendum inserted by the National Roads Authority to cater for local conditions in the country. In this form it is known as the NRA Design Manual for Roads and Bridges or NRADMRB. The Irish version incorporates Volumes 1,2, 4-8 and part of Volume 9 of the UK DMRB.[6]

See also

References

  1. ↑ Volume Contents and Alphanumeric Index
  2. ↑ Introduction to the Design Manual for Roads and Bridges
  3. ↑ http://www.highways.gov.uk/business/12081.aspx
  4. ↑ http://www.standardsforhighways.co.uk/dmrb/vol2/section2/td1906.pdf
  5. ↑ http://www.standardsforhighways.co.uk/ha/standards/tech_info/en_1317_compliance.htm
  6. ↑ http://www.nra.ie/News/DownloadableDocumentation/htmltext,2671,en.html

External links

Highways England

Department for Transport

This article is issued from Wikipedia - version of the 12/4/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.