British standard ordnance weights and measurements

The British standard ordnance weights and measurements for the artillery were established by the Master General of Ordnance in 1764, and these were not altered until 1919 when the metric system was additionally introduced.

This system has largely been replaced by a calibre system, which is the standard today for most weapon systems in use by the world's armed forces.

The 18th century standards were based on projectile weight, and dated back to use of muzzle loaded cannons which fired solid cannonballs. The designations bore only an approximate relationship to the actual weight of the projectile when it was applied to modern artillery.

The table below lists the metric and Imperial calibres of various British weapons, which utilised the standard after 1919:

Name Type Calibre
Metric Imperial
Ordnance QF 1 pounder "pom pom" Infantry gun/AA gun 37 mm 1.457 inch
Ordnance QF 2 pounder Anti-tank gun 40 mm 1.575 inch
Ordnance QF 2 pounder "pom pom" Anti-aircraft gun 40 mm 1.575
Ordnance QF 3 pounder Vickers Naval gun 47 mm 1.85 inch
Ordnance QF 6 pounder Anti-tank gun 57 mm 2.244 inch
Ordnance BL 10 pounder Mountain gun Mountain gun 69.8 mm 2.75 inch
12 pounder (multiple types) Light field gun 76.2 mm 3 inch
Ordnance QF 13 pounder Light field gun 76.2 mm 3 inch
15 pounder (multiple types) Field gun 76.2 mm 3 inch
Ordnance QF 17 pounder Anti-tank gun 76.2 mm 3 inch
Ordnance QF 18 pounder Field gun 83.8 mm 3.3 inch
Ordnance QF 20 pounder Tank gun 83.8 mm 3.3 inch
Ordnance QF 25 pounder Gun-howitzer 87.6 mm 3.45 inch
Ordnance QF 32 pounder Tank gun 96 mm 3.78 inch
Ordnance QF 60 pounder Heavy field gun 127 mm 5 inch

Terminology

When used with British standard nomenclature:

See also

References


This article is issued from Wikipedia - version of the 1/11/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.