Blisk

This article is about blisks in aviation mechanics. For blisks in the Destroy All Humans! series, see Destroy All Humans! 2.
A CNC-milled, single piece axial compressor blisk

A blisk (portmanteau of bladed disk) is a turbomachine component comprising both rotor disk and blades. It consists of a single part, instead of an assembly of a disk and individual, removable blades. Blisks may be integrally cast, machined from a solid piece of material, or made by welding individual blades to a rotor disk. The term is used mainly in aerospace engine design. Blisks may also be known as integrally bladed rotors (IBR).

History

Blisk manufacturing has been used since the mid-1980s. It was first used by Sermatech-Lehr (now known as GKN Aerospace[1]) in 1985 for the compressors of the T700 helicopter engine. Since then, its use has continued to increase in major applications for both compressors and fan blade rotors. Examples include the Rocketdyne RS-68 rocket engine and the General Electric F110 turbofan.

The F-35B variant of the Joint Strike Fighter uses blisks to achieve STOVL.[2]

Engine manufacturer CFM International is using blisk technology in the compressor section of its Leap-X demonstrator engine program, which has completed full-scale rig testing.[3] PowerJet SaM146 engines used on Sukhoi Superjet 100s are also equipped with blisks.[4]

General Electric's TechX engines will also use blisks.[5] The GEnx already uses blisks in some stages.

Advantages

A model of a blisk used in a gas turbine

Instead of making bare compressor disks and attaching the blades later, blisks are single elements combining the two. This eliminates the need to attach the blades to the disk (via screws, bolts, etc.), thus decreasing the number of components in the compressor, while at the same time decreasing drag and increasing efficiency of air compression in the engine. The elimination of the dovetail attachment found on traditional turbine blades eliminates a source for crack initiation and subsequent propagation.[6]

Efficiency improvements of up to 8% are possible.[7]

Disadvantages

Any damage to IBR blades beyond minor dents requires the full removal of the engine so that the IBR may be replaced or, if possible, replacement blades welded on. Maintenance of this nature cannot be done on the flightline and often must be performed at a specialized facility. IBR blades must undergo rigorous harmonic vibration testing as well as dynamic balancing to an extremely high standard, since the natural damping of the dovetail attachment of a typical turbine blade is no longer present.[6]

Process

Blisks can be produced with several different manufacturing processes, including CNC milling, investment casting, electro chemical machining, 3D printing, or welding. Research is being conducted to produce them using friction welding of "near net" part shapes that are then machined down to the final blisk shape.[8]

References

  1. ↑ GKN Aerospace.
  2. ↑ Zolfagharifard, Ellie (28 March 2011), "Rolls-Royce's LiftSystem for the Joint Strike Fighter", The Engineer.
  3. ↑ "Optioning the Future", Aviation Week & Space Technology, 170 (10), p. 37, 9 March 2009.
  4. ↑ Burchell, Bill (2 November 2010), "Powering Up Next-Gen Engine MRO", Aviation Week.
  5. ↑ Croft, John (19 May 2010), "GE TechX engine set to lead new generation of GE turbofans", Flightglobal.
  6. 1 2 Younossi, O; et al. (2002), Military Jet Acquisition: Technology Basics and Cost-Estimating Methodology, RAND Corporation, pp. 29–30, ISBN 0-8330-3282-8.
  7. ↑ Croft, John (21 October 2010), "NBAA: GE TechX fan blisk is all the buzz", Flightglobal.com.
  8. ↑ "Metallics Make Comeback With Manufacturing Advances", Aviation Week, Jun 5, 2013.

External links

Wikimedia Commons has media related to Blisks.
This article is issued from Wikipedia - version of the 6/7/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.