4.5 inch Mark 8 naval gun

4.5 inch Mark 8 naval gun

4.5 inch Mk 8 Mod 1 naval gun on HMS Defender. The multi-faced gunhouse is designed to reduce radar cross section.
Type Naval gun
Place of origin United Kingdom
Service history
In service 1972 - present
Wars Falklands War
Invasion of Iraq 2003
2011 military intervention in Libya
Production history
Designer Mod 0 : Royal Armament Research and Development Establishment
Mod 1 : Royal Ordnance Defence
Variants Mod 0, Mod 1
Specifications
Barrel length 244.75 inches (6.217 m) bore (55 calibres)

Shell Fixed QF 46 pounds (21 kg) HE
Calibre 4.45-inch (113 mm)[1]
Maximum firing range 27.5 kilometres (30,100 yd)[2]

The 4.5 inch Mark 8 is a British naval gun system which currently equips the Royal Navy's destroyers and frigates, and some British destroyers and frigates sold to other countries.

Background

The 4.5 inch gun has been the standard medium-gun calibre of the Royal Navy for use against surface, aircraft and shore targets since 1938. The current 55-calibre Mark 8 gun replaced the World War II era 45-calibre QF 4.5 inch Mk I - V naval guns. Like all British 4.5 inch naval guns, it has a calibre of 4.45 inches (113 mm).[1]

Design

A completely new type of 4.5 inch gun with a longer 55-calibre barrel, it was designed in the 1960s for the Royal Navy's new classes of frigates and destroyers. The new weapon, built by Vickers Ltd Armament Division, was developed by the Royal Armament Research and Development Establishment using the Ordnance, QF 105 mm L13 of the Abbot self-propelled gun as a starting point (it used electrical primers). The outer shell of the gunhouse is built from glass-reinforced plastic (GRP).

The new weapon emphasised reliability and rapid response to fire first round from shutdown state (particularly for defence against missiles)[3] over a high rate of fire, allowing a switch to a lighter, single barrel mounting and ammunition of a one-piece design.

The gun system has a combination of electrical and hydraulic components and the full system penetrates up to three deck levels below the weather deck; deep magazine, gun control room and power room, gunbay and the gunhouse.

The weapon is semi-automatic and can be operated by a smaller crew than its predecessors. With no personnel in the gunhouse, loading is supported by personnel in the gunbay to load the feed ring and in the deep-magazine to pass ammunition to the gunbay. The captain of the gun in the control room ensures continued weapon readiness and the gun controller in the operations room aims and fires the weapon. The gun has a rate of fire of about 25 rounds per minute and a range of 12 nm (22 km; 27.5 km with the newer High Explosive Extended Range round).

The first recipient of the new gun and mount, the Mark 8, was the Iranian frigate Zaal in 1971. The gun entered Royal Navy service in 1973 on the new destroyer Bristol.[4]

These guns proved to be less reliable than the older 4.5 inch Mark V gun (redesignated Mark 6 gun mounting) during the Falklands War, being forced to cease fire on several occasions due to faults.[3]

The first major modification to the mounting, the Mod 1, was developed in 1998 in two tranches;[4] replacing the gunhouse with a reduced radar cross section assembly and replacing the hydraulic loading mechanism with an all-electric system. This particular gun has been nicknamed the "Kryten gun" by members of Royal Navy, after the odd shaped head of a robot from the British Sci-fi comedy series Red Dwarf.[5][6] Babcock upgraded 13 guns to Mod 1 standard between 2005 and 2012.[7]

155 mm variant

The Ministry of Defence investigated a proposal from BAE Systems to "up gun" the 4.5 inch to accept the 155 mm (6.1 inch) gun barrel and breech from the AS-90 self-propelled gun.[8] This "155mm Third Generation Maritime Fire Support" (155 TMF) would introduce a common gun calibre with the British Army and Royal Navy, helping with ammunition logistics, and encouraging joint Army-Navy development of extended range and precision guided shells.[9] A £4m contract was awarded to develop a prototype, and firing trials were scheduled for 2009[10] with delivery in 2014,[4] but the project was cancelled in the cuts implemented following the 2010 Strategic Defence and Security Review.

Replacement

Although the Mk 8 was fitted to the Type 45 destroyer, on the Type 26 Global Combat Ship it will be supplanted by the BAE 5 inch Mk 45 naval gun.[11]

Deployment

Gallery

See also

Notes

References

External links

Wikimedia Commons has media related to 4.5 inch Mark 8 naval gun.
This article is issued from Wikipedia - version of the 11/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.